facebook
twitter
linkedin
 
Home › Coatings and Paints › Commercial Building Exteriors › MasterGard™ 400

MasterGard™ 400

Asphalt Emulsion Bentonite Damp-proof Barrier for Concrete or Masonry Walls

MasterGard™ 400 is a cold applied, high quality asphalt emulsion containing bentonite clay that forms a dampproof barrier on concrete or masonry walls.

 

This breathable film protects against capillary moisture migration while not limiting vapor transmission.

Uses

  • Above or below grade, interior or exterior
  • Formed and poured or tilt wall concrete, concrete block, masonry or stone surfaces
  • Footings, foundations, retaining walls and fire walls
  • Culverts, bridge abutments, copings, parapets

Advantages

  • Excellent bond strength to a variety of substrates and surface textures
  • May be applied to damp surfaces or green concrete
  • Minimizes vapor transmission and dampness through below grade walls
  • Unaffected by soil alkalinity or acidity, organic matter or minerals
  • Excellent durability will not peel, blister, sag or reemulsify
  • Easily applied with brush, roller or spray equipment
© 2019 ChemMasters, Inc.
Silencure, Polyseal, Traz, Aquanil, Spall Guard, Chemisil, EZ Strip Cure, SafeSeal, Spray Film, DuraShield SRT, Slip Stop and Exposee are trademarks of ChemMasters, Inc. ChemMasters and Safe-Cure are registered trademarks of ChemMasters, Inc.


300 Edwards Street, Madison, Ohio 44057
Phone 440.428.2105 - 800.486.7866
Fax 440.428.7091
 
 
© 2019 ChemMasters, Inc.
Silencure, Polyseal, Traz, Aquanil, Spall Guard, Chemisil, EZ Strip Cure, SafeSeal, Spray Film, DuraShield SRT, Slip Stop and Exposee are trademarks of ChemMasters, Inc. ChemMasters and Safe-Cure are registered trademarks of ChemMasters, Inc.
300 Edwards Street, Madison, Ohio 44057
Phone 440.428.2105 - 800.486.7866
Fax 440.428.7091