facebook
twitter
linkedin
 
HomeAccelerators & Retarders › Exposee™

Exposee™

Surface Retarder to Produce Exposed
Aggregate for Concrete Surfaces

Exposee is a concrete surface retarder suitable for use on horizontal surfaces to produce decorative exposed aggregate finishes or profiled surfaces for subsequent toppings, overlays or membranes.

 

Exposee, applied to fresh, green concrete, retards the surface mortar set eliminating the need for costly sandblasting or acid washing.

Uses

  • Horizontal concrete surfaces
  • Creates decorative or slip resistant surfaces
  • Suitable for precast panels, sidewalks, drive, patios
  • Leaves rough surface to improve mechanical bond for keyway joints, waterproofing membranes and cementitious coatings

Advantages

  • Tinted formulation insures even coverage and performance
  • Easy to apply with standard pressurized spray equipment, brush or roller
  • Less costly than sandblasting or green cutting
  • Aggregates remain clean and sharp with no residue to neutralize
  • Use on adjacent masonry or reinforcing steel to reduce cleaning procedures
  • Eliminates environmental dangers associated with acid washing or other chemical methods
  • Provides uniform depth of retardation, up to 0.25 inch (6mm)
© 2018 ChemMasters, Inc.
Silencure, Polyseal, Traz, Aquanil, Spall Guard, Chemisil, EZ Strip Cure, SafeSeal, Spray Film, DuraShield SRT, Slip Stop and Exposee are trademarks of ChemMasters, Inc. ChemMasters and Safe-Cure are registered trademarks of ChemMasters, Inc.


300 Edwards Street, Madison, Ohio 44057
Phone 440.428.2105 - 800.486.7866
Fax 440.428.7091
 
 
© 2018 ChemMasters, Inc.
Silencure, Polyseal, Traz, Aquanil, Spall Guard, Chemisil, EZ Strip Cure, SafeSeal, Spray Film, DuraShield SRT, Slip Stop and Exposee are trademarks of ChemMasters, Inc. ChemMasters and Safe-Cure are registered trademarks of ChemMasters, Inc.
300 Edwards Street, Madison, Ohio 44057
Phone 440.428.2105 - 800.486.7866
Fax 440.428.7091