facebook
twitter
linkedin
 
Home › Coatings and Paints › Bridge Coatings › Dry Block

Dry Block

Waterproofing Coating for Concrete

 

ChemMasters’ Dry Block is a water-based emulsion waterproof coating for interior and exterior vertical surfaces, suitable for both above and below grade applications. Dry Block forms a durable waterproof coating when applied to concrete, block, masonry, stucco and brick.

Uses

  • Waterproof interior and exterior concrete, block, masonry, stucco and brick.
  • Suitable for use above or below grade.
  • Waterproof basements, foundations, garages, retaining walls, and other cement based vertical structures.

Advantages

  • Effectively waterproofs concrete, cinder block, masonry, stucco and brick walls.
  • Excellent resistance to wind driven rain.
  • Withstands over 25 psi of hydrostatic pressure.
  • Reduces spalling of vertical concrete surfaces due to freeze-thaw cycling.
  • Excellent adhesion to uncoated vertical concrete, cinder block, masonry, stucco and brick surfaces.
© 2024 ChemMasters, Inc.
Silencure, Polyseal, Traz, Aquanil, Spall Guard, Chemisil, EZ Strip Cure, SafeSeal, Spray Film, DuraShield SRT, Slip Stop and Exposee are trademarks of ChemMasters, Inc. ChemMasters and Safe-Cure are registered trademarks of ChemMasters, Inc.


300 Edwards Street, Madison, Ohio 44057
Phone 440.428.2105 - 800.486.7866
Fax 440.428.7091
 
 
© 2024 ChemMasters, Inc.
Silencure, Polyseal, Traz, Aquanil, Spall Guard, Chemisil, EZ Strip Cure, SafeSeal, Spray Film, DuraShield SRT, Slip Stop and Exposee are trademarks of ChemMasters, Inc. ChemMasters and Safe-Cure are registered trademarks of ChemMasters, Inc.
300 Edwards Street, Madison, Ohio 44057
Phone 440.428.2105 - 800.486.7866
Fax 440.428.7091

ERISA Documents for Welfare Benefit Plan