 |
|
|
|
|
 |
|
|||
|
||||
 |
 |
 |
|
|
 |
|
|||
|
||||
 |
|
|||
 |
|
|||
|
||||
|
||||
 |
|
|||
 |
|
|||
|
||||
|
||||
 |
|
|||
 |
|
|||
|
||||
 |
|
|||
 |
|
|||
|
||||
|
||||
 |
|
|||
 |
|
|||
|
||||
|
||||
 |
|
|||
 |
|
|||
Phone 440.428.2105 - 800.486.7866
Fax 440.428.7091
To contact ChemMaster Directly use this link: Contact Us Form
Special Purpose Products |
|
|
Adhesive Lubricant 105 is a solution of neoprene rubbers in aromatic solvent with plasticizers and acid interceptors. |
|
|
ChemTint colors are finely ground, commercially pure non-organic metallic oxide pigments. ChemTint is lime-proof, alkali and fade resistant, providing strong, intense, durable shades of color. |
|
|
ConColor is a ready to use, natural aggregate dry shake hardener for concrete. It is composed of crushed, washed and specially graded quartz/silica aggregate, cementitious binders, proprietary plasticizers and dispersing agents and stable colorants. ConColor is recommended for ACI 302, Class 2, 3, 4, 5 and 6 floors. |
|
|
Exposee is a concrete surface retarder suitable for use on horizontal surfaces to produce decorative exposed aggregate finishes or profiled surfaces for subsequent toppings, overlays or membranes. Exposee, applied to fresh, green concrete, retards the surface mortar set eliminating the need for costly sandblasting or acid washing. |
|
|
FreezBan liquid and FreezBan Beads are multipurpose admixtures for use with portland cement/lime mortar and prepared masonry mortars and non-reinforced concrete. This exclusive rust retarding formulation combines an effective and time proven chemical accelerator, calcium chloride, with a powerful wetting agent. |
|
|
FreezBan NC is a set accelerating/water reducing liquid admixture for concrete and mortar and is formulated without calcium chloride or chloride ions. It does not promote corrosion and may be used in areas having contact with reinforcing steel, door and window jambs or other metallic building materials. FreezBan NC improves the workability and finishing characteristics of concrete and mortar placed in cold weather. |
|
KemPlate is a heavy duty metallic dry shake hardener formulated specifically for floors requiring flatness numbers of F40 or greater with superior abrasion resistance and durability. It is compounded with select sized iron aggregate, cementitious binders, and proprietary components which enhance placeability at high tolerances. KemPlate is recommended for ACI 302, Class 5-6 floors. |
|
|
Lube Plus 4070 is a single component, moisture curing polyurethane in a solution of aromatic hydrocarbon solvents. It is used as an adhesive lubricant and bonding agent for neoprene compression seals in concrete pavement. |
|
|
SprayFilm is a monomolecular, evaporation retardant film for freshly placed concrete. It aids in retaining surface moisture under adverse environmental conditions. |
