 |
|
|
|
|
 |
|
|||
|
||||
 |
 |
 |
|
|
 |
|
|||
|
||||
 |
|
|||
 |
|
|||
|
||||
|
||||
 |
|
|||
 |
|
|||
|
||||
|
||||
 |
|
|||
 |
|
|||
|
||||
 |
|
|||
 |
|
|||
|
||||
|
||||
 |
|
|||
 |
|
|||
|
||||
|
||||
 |
|
|||
 |
|
|||
Phone 440.428.2105 - 800.486.7866
Fax 440.428.7091
To contact ChemMasters directly use this link: Contact Us Form
Sealers |
|
|
Anti-Spall 55 is a penetrating blend of boiled linseed oil and mineral spirits for exterior concrete surfaces. |
|
|
Aquanil is a penetrating, breathable moisture repellent for exterior concrete and masonry surfaces. It contains 5% active silicone resin in a petroleum distillate solution and contains no fillers. Aquanil HS is clear and will not alter the appearance of treated surfaces. |
|
|
Aquanil Plus is a penetrating, chemically reactive alkylalkoxy silane moisture and water repellent for concrete and masonry. The size of the silane molecule allows a greater depth of penetration than siloxane type water repellents. |
|
|
Aquanil Plus 40A is a penetrating, chemically reactive alkyltrialkoxy, 40% solids, solvent based silane sealer to repel moisture and water from concrete and masonry. Aquanil Plus 40A is formulated with exempt solvents to lower VOCs so that it meets the EPA requirements in the Ozone Transport Commission areas and in the state of Ohio. |
|
|
Aquanil Plus 55 is a penetrating, chemically reactive alkyltrialkoxy, 55% solids, solvent based silane sealer to repel moisture and water from concrete and masonry. |
|
|
Aquanil Plus 55 IPA is a penetrating, chemically reactive alkyltrialkoxy, 55% solids, solvent based silane sealer to repel moisture and water from concrete and masonry. |
|
|
Aquanil Plus 100 is a penetrating, chemically reactive alkyltrialkoxy silane moisture and water repellent for concrete and masonry. |
|
|
Chemisil is a clear, water based liquid chemical floor hardener which reacts with the free lime and calcium carbonate in concrete. It seals the pores and capillaries to harden and dustproof surfaces. |
|
|
Chemisil Plus is a chemically reactive solution of inorganic siliceous materials and proprietary components. It changes the chemical composition of treated surfaces filling the pores and capillaries of the concrete matrix with a hard dense gel. |
|
|
Chemisil PlusOR in combination with Chemisil Plus create a chemically reactive system. This system changes the chemical composition of treated surfaces by filling the pores and capillaries of the concrete matrix with a hard dense gel. The system hardens and densifies the surface while making it resistant to oil and grease penetration. |
|
|
Duraguard
401 is a 3 component, low viscosity, solvent free, high molecular
weight methacrylate penetrating sealer and crack healer. Duraguard
401 may be used as a gravity feed resin or as a specialized crack
injection product. |
|
|
Duraguard HM Sealer is a 100% solids, very low viscosity, high modulus epoxy sealer and crack filler. It is moisture insensitive and can be gravity fed on horizontal surfaces or pressure injected into vertical and overhead planes for structural repairs. |
|
|
DuraShield SRT is a new generation high performance concrete sealer that incorporates the gloss and application characteristics of a solvent-based sealer, the low VOCs and easy clean-up of a water-based product and the chemical & abrasion resistance of an epoxy. DuraShield SRT develops a rich, high gloss, wet look to deepen the color and enhance the appearance of pigmented, decorative concrete. Unlike water-based sealers, DuraShield SRT can be used to re-seal concrete and may be used in cooler temperatures (down to 40oF / 4.4oC). Unlike standard acrylic sealers, DuraShield SRT will not soften with expo-sure to solvents. DuraShield SRT is a 2-component, high solids, catalyzed sealer that provides superior chemical and abrasion resistance and will never yellow. DuraShield SRT contains no solvent. A functionalized alkoxy silane is added before application to crosslink the resin for maximum performance. |
|
|
Spall Guard WB 10% is a penetrating, chemically reactive oligomerous alkylalkoxy siloxane moisture and water repellent for concrete and masonry. Spall Guard WB 10% contains a special beading agent to enhance water resistance and a catalyst to ensure that the optimum chemical reaction necessary for water repellency occurs. |
|
|
Sure-Lock WB is a one step sealer and joint sand stabilizer specifically designed for interlocking stone and pavers. Sure-Lock WB is a high-solids, water-based product developed to penetrate deep into joint sand. The Sure-Lock WB formulation tenaciously binds the sand together and to the sides of the paver to lock the paver in place. Sure-Lock WB prevents the erosion of joint sand and reduces growth of weeds while it stabilizes the paver. Sure-Lock WB also forms a tough film on the surface of the paver to protect it from the damaging effects of salt spray, acid rain, dirt, food stains and fertilizers. |
|
|
Traz 25 is a state of the art, film forming concrete and masonry waterproofing sealer formulated with methyl methacrylate polymers. Traz 25 resists contamination from hydrocarbon based substances and other chemicals. It repels water, is non-yellowing and forms an extremely durable film. |
