1207 NON-METHYLENE CHLORIDE STRIPPER

03 01 30/40/50.61 Resurfacing of Concrete

CHEMDECK: Colored Cementitious Topping (6 standard colors)

03 01 30/40/50.72 Rehabilitation of Concrete

DURAPATCH METALLIC: 3-Component Metallic R & R Mortar

DURAPATCH MMA: 2-Component Cold Weather (-10F) Repair Mortar

CHEMSPEED 65: Very Rapid Setting Concrete Repair Mortar

CHEMSPEED 65 DBR: Dowel Bar Retrofit Grout

CHEMSPEED 75: Low Temperature Rapid Strength Repair Mortar

FEATHERPATCH: One Component, Fast Setting, Polymer Modified High Strength, Up To 1 Inch

CHEMMIX: Concentrated Mix Design to Provide Workability Characteristics of High Strength Ready-Mix Concrete. Use as Patching Material or in Forms up to 10 Inches with Addition of Stone Aggregate.

SPEEDPATCH: Fast-Setting, High Early Strength, Gypsum Free Mortar

CHEMPATCH VO1: Fast-Setting Mortar, Polymer Modified, with Fibers and Corrosion Inhibitors

DURAGUARD 100: 100% Solids Epoxy Primer, Sealer, and Bonding Agent

POLYTOPS FAST SET EPOXY: General Purpose Epoxy Binder

POLYWELD EPX CI: 3-Component, Solvent Free, Epoxy/Cementitious Bonding Agent/Rebar Coating with Corrosion Inhibitors

DURAGUARD 100: 100% Solids Epoxy Primer, Sealer, and Bonding Agent

CHEMFLOW PRIMER: Bonding Agent for Cementitious Underlayments

POLYWELD EPX CI: 3-Component, Solvent Free, Epoxy/Cementitious Bonding Agent/Rebar Coating with Corrosion Inhibitors

CRETELOX: High Solids Acrylic Latex Bonding Agent and Admixture

CHEMPLUG: Fast Setting, Non-Shrink, 1-Component Water-Stop Mortar

03 11 00 Concrete Forming

SAFE-SLIP / SAFE-SLIP CONCENTRATE: Water Emulsion

FORMLAK: Polymer Form Release and Protective Coating

03 35 00 Concrete Finishing

KEMPLATE F 40: Heavy Duty Metallic Aggregate Dry Shake Hardener

03 35 19 Colored Concrete Finishing

03 35 23 Exposed Aggregate Concrete Finishing

EXPOSEE: Exposed Aggregate Surface Retarder

EXPOSEE V: Exposed Aggregate Surface Retarder for Vertical Applications

Curing Compounds (Water Based)

SAFE-CURE 1000: White Pigmented, Wax Emulsion

SAFE-CURE 1000 CLEAR: Clear, Wax Emulsion

SAFE-CURE 1200: White Pigmented, Wax Emulsion, ODOT Approved Supplemental Specification # 800

SAFE-CURE 1200 CLEAR: Clear, Wax Emulsion, ODOT Approved Supplemental Specification # 800

SAFE-CURE 2000: White Pigmented, Resin Concentrate. Complies With All Current Federal and State EPA Regulations

SAFE-CURE CLEAR: Water Based Resin Cure With Rapid Decomposing Properties

EZ STRIP CURE: Easy to Remove Interior or Exterior Curing Compound

Curing & Sealing Compounds (Solvent Based)

SPRAY-CURE & SEAL 25: Styrene Acrylate, Medium Gloss, Minimum 25% Solids

SPRAY-CURE & SEAL 25A: Low VOC, Acetone Based, OTC Compliant

POLYSEAL: High Performance, Non-Yellowing, Clear Gloss, Tintable with
POLYSEAL TINT SYSTEM (12 colors)

POLYSEAL A: High Performance, Low VOC, Acetone Based, OTC Compliant, Tintable with POLYSEAL TINT SYSTEM (12 colors)

POLYSEAL PLUS: Premium Quality, High Solids (30% minimum), High Gloss, Non-Yellowing, Tintable with POLYSEAL TINT SYSTEM

CRYSTAL CLEAR: Premium Quality, High Gloss, Non-Yellowing, Long Lasting. Abrasion, Oil, and Grease Resistant. Excellent for Decorative Concrete Sealing

CRYSTAL CLEAR A: Premium Quality, Low VOC, Acetone Based, OTC Compliant

SILENCURE: Patented Formula, Acrylic Curing and Sealing Compound Containing Silane, Meets NCHRP244 Standards, Non-Yellowing

SILENCURE A: Patented Formula, Acrylic Curing and Sealing Compound Containing Silane, Acetone Based, OTC Compliant, Meets NCHRP 244 Standards, Non-Yellowing

Curing and Sealing Compounds (Water Based)

SAFE-SEAL: Odorless, Acrylic Cure and Seal

SAFE-CURE & SEAL 20: Clear, Economical, Water-Based Styrene Acrylate

POLYSEAL WB: High Performance, Non-Yellowing, High Solids

SAFE-CURE & SEAL EPX: 2-Component, Water-Based Epoxy

Sealing Compounds

TRAZ 25: High Gloss, Formulated with Methyl Methacrylate Polymers, Chemical Resistance, Non-Yellowing

TRAZ 25 A: High Gloss, Low VOC, OTC Compliant, Chemical Resistant,
Non-Yellowing

SURE-LOCK WB; Joint Stabilizing Sealer for Interlocking Pavers,
Prevents Sand Erosion, Enhances Color of Pavers

GRAFFITI SEAL: Water-Based Sacrificial Anti-Graffiti Coating

GRAFFITI STOPPER: Graffiti Protection, 2-Component, Clear or Pigmented Aliphatic Urethane Coating, Non-Yellowing

DURASHIELD SRT: 2-Component, High Performance, Superior Chemical and Abrasion Resistance, Low Temperature Application (40F), Apply Over Existing Solvent or Water Based Sealers, High Gloss, Interior or Exterior, Low Odor.

CHEMISIL: Clear, Sodium Silicate Hardener and Dustproofer

CHEMISIL PLUS: Chemically Reactive Liquid Hardener

CHEMISIL PLUS OR: Topcoat Over CHEMISIL PLUS to Increase Resistance To Oil and Grease

SPRAYFILM: Retains Surface Moisture, Concentrated

03 53 00 Concrete Topping

MYTRON: Heavy-Duty Metallic Aggregate Industrial Floor Topping

CHEMFLOW HS; Polymer Modified, High Strength, Traffic Grade, Interior Self-Leveling Overlayment. Use With CHEMFLOW PRIMER

03 54 00 Cast Underlayment

LEVEL-TOP: Polymer Modified, Self-Leveling, Cement-Based (gypsum free) Interior Underlayment. Use with CHEMFLOW PRIMER

03 62 00  Non-Shrink Grouting

03 62 13 Non-Metallic Non-Shrink Grout

CONSET GROUT : Cementitious Construction Grade Grout

03 62 16 Metallic Non-Shrink Grout

MET-OX GROUT: Cementitious, Precision Grade, High Strength, Dynamic Load Bearing

03 63 00 Epoxy Grouting

POLYTOPS GC GROUT: 3-Component Construction Grade Epoxy Grout

POLYTOPS HF GROUT: 3-Component, High Flow. High Strength, Chemical Resistance, Dynamic Load Bearing

POLYTOPS CR GROUT: 3-Component Chemical Resistant Vinyl Ester Grout

POLYTOPS MMA GROUT: 3-Component, Low Temperature, High Strength Chemical Resistance Grout, Resists Freeze Thaw Damage

P.A.C. (POURABLE ANCHORING CEMENT): Rapid Setting Cementitious Mortar, Gypsum Free, Interior or Exterior Application, High Strength

POLYTOPS FAST SET:  High Strength, Moisture Tolerant, Anchoring Gel

03 64 00 Injection Grouting

DURAGUARD HM SEALER: 100% Solids Epoxy, Very Low Viscosity, Moisture Insensitive, Injection Crack Filler

Crack Healers and Surface Sealers (Gravity Fed)

DURAGUARD HM SEALER: 100% Solids Epoxy, Very Low Viscosity, High
Modulus,Gravity Fed Crack Filler and Sealer

DURAGUARD 401: HMWM: 3-Component, Low Viscosity, Solvent Free, High Molecular Weight Methacrylate Penetrating Sealer and Healer