Translucent Tint is a concentrated tint that can be mixed with a clear, solvent-based sealer or cure & seal product to create a translucent stain for concrete and masonry.

Translucent Tint can be used with any ChemMasters’ solvent-based acrylic product including our low VOC, acetone formulations.

A Translucent Tint treated ChemMasters sealer provides long-lasting protection from abrasion, UV exposure, staining, freeze-thaw damage, salts, and many other chemicals.

In addition, a Translucent Tint treated sealer enhances the beauty of all concrete especially exposed aggregate concrete.

Translucent Tint:
   ● Deepens the color and
       enhances the gloss of the
       concrete matrix
   ● Stains the matrix to provide
       a uniform, decorative
       appearance
   ● Highlights the natural color
       of stone
   ● Enables a wide range of
       decorative effects to be
       achieved
   ● Hides variations in the
       substrate color

The standard application rate for Translucent Tint is 1 quart (single) or 2 quarts (double) per 5-gallon pail of clear acrylic sealer.  The dosage rate used depends on the decorative effect desired. 

Using a double dose of Translucent Tint per pail will darken and deepen the color more than a single dose (see color chart on reverse side). 

Once determined, the same amount of Translucent Tint per pail should be used for the entire project.  It is recommended that a 1-quart application be tested before adding a second quart.

Easy To Use – Pour 1 or 2 quarts of Translucent Tint into a 5-gallon pail of a clear, solvent-based, ChemMasters sealer or cure & seal and stir. 

Translucent Tint mixes in quickly and easily.  Apply the stain with a brush, roller or sprayer according to the directions on the 5-gallon pail.