 |
|
|
|
|
 |
|
|||
|
||||
 |
 |
 |
|
|
 |
|
|||
|
||||
 |
|
|||
 |
|
|||
|
||||
|
||||
 |
|
|||
 |
|
|||
|
||||
|
||||
 |
|
|||
 |
|
|||
|
||||
 |
|
|||
 |
|
|||
|
||||
|
||||
 |
|
|||
 |
|
|||
|
||||
|
||||
 |
|
|||
 |
|
|||
Phone 440.428.2105 - 800.486.7866
Fax 440.428.7091
To contact ChemMaster Directly use this link: info@chemmasters.net
Cures & Sealers |
|
|
EZ Strip Cure is a water based, fully V.O.C. compliant curing compound for fresh concrete which is removed easily after curing is complete for subsequent application of penetrating sealers, high performance coatings or waterproofing compounds. |
|
|
Crystal Clear is premium quality, super high gloss, non yellowing, curing and sealing compound. Crystal Clear is a state-of-the-art proprietary formulation which creates the highest gloss possible on concrete. Crystal Clear coats concrete with a chemically bonded siliconized acrylic film that deepens the color and enhances the look of pigmented or decorative concrete. Crystal Clear completely resists discoloration from ultraviolet light exposure. It is extremely abrasion resistant and keeps its high gloss finish much longer than standard concrete sealers. Crystal Clear will retard efflorescence while resisting oil, grease and food stains. Crystal Clear eliminates concrete dusting, while protecting concrete against salt and water penetration. |
|
|
Polyseal is a high solids, high performance concrete curing and sealing compound. This state-of-the-art proprietary formulation completely resists discoloration from ultraviolet light exposure, creating a glossy membrane which remains clear throughout its service life. |
|
Polyseal WB is a high solids, V.O.C. compliant, concrete curing and sealing compound. This state-of-the-art proprietary formulation completely resists discoloration from ultraviolet light exposure, creating a glossy membrane which remains clear throughout its service life. |
|
|
SafeSeal is a water based acrylic curing and sealing compound for concrete. It is V.O.C. compliant and does not contain any hydrocarbon solvents. SafeSeal resists yellowing and degradation from ultraviolet light while sealing and dustproofing concrete and masonry surfaces. |
|
|
Safe-Cure 1000 is a water based, white pigmented, wax emulsion concrete curing compound. It does not contain organic solvents and has 0 gm/L V.O.C. content. |
|
|
Safe-Cure 1200 is a water based, white pigmented, wax emulsion concrete curing compound for concrete.This formulation has been specifically designed to meet the Ohio Department of Transportation Supplemental Specification #800. When applied to fresh concrete, Safe-Cure 1200 creates a film over the concrete to retain water in the Safe-Cure 1200 is used to cure any exterior concrete including pavement, curbing, sidewalks, driveways, parking lots, median barriers, and mat foundations. |
|
|
Safe-Cure 1200 Clear is a clear, water based, wax emulsion concrete curing compound for concrete.This formulation has been specifically designed to meet the Ohio Department of Transportation Supplemental Specification #800. When applied to fresh concrete, Safe-Cure 1200 creates a film over the concrete to retain water in the concrete to Safe-Cure 1200 Clear is used to cure any exterior concrete including pavement, curbing, sidewalks, driveways, parking lots, median barriers, and mat foundations. |
|
|
Safe-Cure 2000 is a water based, white pigmented, resin concrete curing compound. It complies with all current federal and state EPA regulations.
|
|
|
Safe-Cure Clear is a clear, water based resin cure which exhibits rapid decomposing characteristics when exposed to ultraviolet light, sunlight, and abrasion. It is a V.O.C. Compliant alternative to solvent based dissipating resin cures. |
|
|
Safe-Cure & Seal 20 is a water emulsion, styrene acrylate copolymer curing and sealing compound for concrete. It is V.O.C. Compliant, produces a medium gloss continuous film which has excellent resistance to yellowing from ultraviolet light exposure and protects concrete surfaces from intrusion of water borne contaminants and dirt. |
|
|
Safe-Cure & Seal EPX is a V.O.C. Compliant, water based epoxy, curing and sealing compound for horizontal or vertical concrete surfaces. It is suitable for use as an epoxy primer or coating for cured concrete. For exterior applications, a special ultraviolet (UV) resistant formulation is available upon request. |
|
|
Silencure is a solvent-based, pure acrylic copolymer curing and sealing compound for concrete. When applied to fresh concrete, Silencure produces a non-yellowing, clear, continuous film, which effectively cures fresh concrete and provides a tough protective acrylic film to the surface. Silencure is unique because in addition to being an effective film forming curing and sealing compound, it contains silane. The silane penetrates the fresh concrete and provides long term protection for the concrete after the film has dissipated. Unlike other silane or siloxane treatments, Silencure can be applied to fresh concrete to cure to ASTM C-309 standards. Unlike other curing compounds, Silencure penetrates into the pores of the concrete and forms a hydrophobic gel that meets the chloride ion restrictions of NCHRP 244 to reduce the penetration of water, salts and deicing chemicals. |
|
|
Spray-Cure Clear is a solvent based solution of hydrocarbon resins. Spray-Cure Clear produces a film over fresh concrete that prevents the loss of water and allows for full hydration of the cement and thus maximum ultimate strength of the concrete and reduced drying shrinkage cracks. Spray-Cure Clear's curing efficiency significantly exceeds the ASTM standards for typical curing compounds. It also protects the concrete from contaminants including dirt, water and salt. Spray-Cure Clear dries to a translucent, amber color that will darken or discolor concrete surfaces until it is removed or wears away. |
|
|
Spray-Cure DRHS is a resin polymer concrete curing compound which promotes excellent moisture retention in freshly poured concrete allowing pavements and structures to meet or exceed design strength. Spray-Cure DRHS dries to a translucent, amber color that may darken or discolor concrete surfaces until it is removed or wears away. |
|
|
Spray-Cure & Seal 25 is a styrene acrylate copolymer, membrane forming curing and sealing compound for concrete. It produces a medium gloss continuous film which has good resistance to discoloration from ultraviolet light exposure and protects concrete surfaces from intrusion of water borne contaminants and dirt. |
|
|
Translucent Tint is a concentrated tint that can be mixed with a clear, solvent-based sealer or cure & seal product to create a translucent stain for concrete and masonry. Translucent Tint can be used with any ChemMasters’ solvent-based acrylic product including our low VOC, acetone formulations. A Translucent Tint treated ChemMasters sealer provides long-lasting protection from abrasion, UV exposure, staining, freeze-thaw damage, salts, and many other chemicals. In addition, a Translucent Tint treated sealer enhances the beauty of all concrete especially exposed aggregate concrete. |
|
|
Spray-Cure & Seal Plus is a high solids, high performance, acrylic polymer curing and sealing compound for concrete. It provides superior moisture retention at extended application rates when used as a cure while forming a durable, glossy membrane for improved appearance. |
