 |
|
|
|
|
 |
|
|||
|
||||
 |
 |
 |
|
|
 |
|
|||
|
||||
 |
|
|||
 |
|
|||
|
||||
|
||||
 |
|
|||
 |
|
|||
|
||||
|
||||
 |
|
|||
 |
|
|||
|
||||
 |
|
|||
 |
|
|||
|
||||
|
||||
 |
|
|||
 |
|
|||
|
||||
|
||||
 |
|
|||
 |
|
|||
Phone 440.428.2105 - 800.486.7866
Fax 440.428.7091
To contact ChemMasters directly use this link: Contact Us Form
Coatings - Horizontal Applications |
Duraflow™
150
|
Duraflow 150 is a three component, self-leveling, epoxy topping composed of a two part, 100% solids epoxy and blended aggregate. All components are precisely measured and packaged for accurate on-site mixing and use. |
|
|
|
Duraflow 250 is a two component, self-leveling, 100% solids epoxy novalac topping. It is a highly chemical resistant coating that is applied at 1/8 in./32 mm. |
|
Duraflow
550™
 |
Duraflow 550 is a two component, self-leveling vinyl ester topping applied at 1/8 in./125 mils. It is comprised of heavy bodied, vinyl ester resin and a catalyst. |
|
|
EpoxyKote 100 is a two component, low modulus, 100% solids, moisture tolerant epoxy primer, sealer and injection resin. Additionally, it is a bonding agent, coating for reinforcing steel, or when mixed with aggregate, a repair mortar for horizontal repairs. USES: Sealer for interior, horizontal concrete surfaces, Primes concrete surfaces specified to receive epoxy, novalac or urethane coatings and toppings, Tie-Coat to enhance the adhesion of a new coating to an old, hard to bond to coatings or surfaces such as aged epoxies, urethanes or ceramic tile, Bonding agent for fresh to hardened or hardened to hardened concrete or premixed repair mortars, Injection resin for crack repair, Seals cleaned reinforcing steel prior to recovering with concrete or mortar, High strength binder that can be mixed with fillers to make a repair mortar for thin repairs subjected to heavy duty traffic, including steel wheels. |
|
|
EpoxyKote 100 WB is a two-component, V.O.C. compliant epoxy. It is water based and can be used as a primer for epoxy or urethane topcoats. Two coats of EpoxyKote 100 WB alone may be used as a light duty sealer. USES: Seals interior floors and walls, Primer for urethanes, epoxies or other polymer coatings, Foot traffic, commercial and light duty industrial, Locker rooms, cafeterias, schools, lavatories, Retail outlets, malls, museums, airline hangars and service stations. |
|
| EpoxyKote
100 EO
|
EpoxyKote 100EO is a two component, rubber modified epoxy coating and topping. EpoxyKote 100EO has a mix ratio of 2 :1 and is used as both the base coat (primer) and seal coat in a seeded floor system. EpoxyKote 100EO sets quickly (30 minutes at 70°F making it an excellent product for fast turnaround projects or cold weather / refrigerator applications. EpoxyKote 100EO can also be used for quick and high strength hole or crack repairs to horizontal surfaces. USES: Overlay system for repair of road or bridge surfaces, Patching or overlays in cold temperature situations including freezers and refrigerators where no solvents or objectionable odors are not permitted, Overlays for industrial or commercial floors requiring high levels of impact or abrasion resistance, Epoxy coatings or overlays where fast turn-around is required, Fast setting, high strength binder that can be mixed with fillers to make a repair mortar for thin repairs subjected to heavy duty traffic, including steel wheels. |
|
|
|
Duraguard 110 is a two component, low modulus, 50% polyamide epoxy designed for use over con-crete as a primer for subsequent coatings or as a topcoat wearing surface. Duraguard 110 may be applied over fresh concrete as a curing com-pound or over older concrete as a primer / sealer. Duraguard 110 is available in clear or pigmented formulations. |
|
|
EpoxyKote 120 is a two component, 100% solids, high build epoxy coating system designed for application at 15-20 mils. USES: EpoxyKote 120 is a topcoat over a primer in areas subject to moderate wear and / or moderate chemical attack. EpoxyKote 120 is available in many colors to provide a decorative easy to maintain floor in commercial establishments. EpoxyKote 120 is used as a sealer coat for a trowel down epoxy system. EpoxyKote 120 is available in a non-sag formulation (EpoxyKote 120V) for application on vertical surfaces. |
|
|
|
Duraguard 220 is a two component, 100% solids, chemical resistant, epoxy novalac coating. |
|
|
|
Duraguard 310 CRU is a two component, aliphatic polyurethane coating. It may be used as a topcoat over epoxy and epoxy novalac systems to improve chemical and ultraviolet light resistance. |
|
|
Duraguard 400 is a two-component, fast-setting Methyl Methacrylate (mMa) primer typically applied direct to prepared concrete at 100 SF/GA. It is comprised of a methyl methacrylate resin, an isocyanate bond enhancer and a catalyst. |
|
|
|
Duraguard 420 is a two-component, high build, Methyl Methacrylate (mMa) coating. It is comprised of a mMa resin and a catalyst. An accelerator is available for use in cold temperatures |
|
|
Duraguard 425 is a two-component, high build, Methyl Methacrylate (mMa) pigmented topcoat typically applied at 100 SF/GA. It is comprised of a mMa resin and a catalyst. |
|
|
|
Duraguard 500 is a two-component, flexible, vinyl ester primer for use with Duraguard 500 Series coatings and toppings. It is comprised of vinyl ester resin and a catalyst. |
|
|
|
Duraguard 520 and 530 aretwo-component, 100% solids, flake-filled vinyl ester coating systems with superior levels of chemical resistance, adhesion, tensile and flexural strengths. Duraguard 520 is a 15-20 mil coating while Duraguard 530 is a high build system applied at 30 mils per coat for enhanced chemical resistance in extremely harsh environments. |
|
|
|
Durastone 140 is a three component, trowel applied epoxy topping consisting of a two part, 100% solids epoxy and a precisely blended aggregate. It is normally installed at 0.25 inch (0.64 cm) depth. |
|
|
|
GREEN-THANE 310 WB is a two component, waterborne aliphatic, chemical, abrasion, and stain resistant high gloss polyurethane coating. |
|
|
|
M.C.U. is a clear, single component, moisture curing urethane sealer. It is moderately chemical resistant and produces a glossy appearance. |
|
|
|
Safe-Thane is a clear, single component, water-based polyurethane coating for wood, concrete and masonry. Safe-Thane exhibits excellent mar and scuff resistance when applied to rigid substrates and will produce a high gloss with outstanding long term weathering performance. |
|
