 |
|
|
|
|
 |
|
|||
|
||||
 |
 |
 |
|
|
 |
|
|||
|
||||
 |
|
|||
 |
|
|||
|
||||
|
||||
 |
|
|||
 |
|
|||
|
||||
|
||||
 |
|
|||
 |
|
|||
|
||||
 |
|
|||
 |
|
|||
|
||||
|
||||
 |
|
|||
 |
|
|||
|
||||
|
||||
 |
|
|||
 |
|
|||
|
|
|
|
|
|
|
|||
|
||||
|
|
|
|
|
|
|
|||
|
||||
|
|
|||
|
|
|||
|
||||
|
||||
|
|
|||
|
|
|||
|
||||
|
||||
|
|
|||
|
|
|||
|
||||
|
|
|||
|
|
|||
|
||||
|
||||
|
|
|||
|
|
|||
|
||||
|
||||
|
|
|||
|
|
|||
Phone 440.428.2105 - 800.486.7866
Fax 440.428.7091
info@chemmasters.net
create specs and schedules using ChemMasters
products!
|
|
ChemSeal is a portland cement based waterproof coating for concrete and masonry. Three separate formulas of ChemSeal are available to meet the varying requirements of waterproofing, repairing and decorating interior or exterior surfaces, above or below grade. ChemSeal fills and seals the pores and voids in the surface imparting strength and durability as well as a uniform appearance. ChemSeal allows moisture to evaporate, preventing vapor buildup which causes blistering and peeling. |
|
|
|
ColorCoat is a heavy bodied 100% acrylic emulsion decorative coating, specifically formulated to withstand outdoor exposure on concrete, masonry, stucco or cement plaster. It develops a tough durable water repellent film that is alkali, acid and mildew resistant and contains an inhibitor to prevent mold and fungus growth. |
|
|
|
ColorLastic is a pigmented, waterproof coating for concrete and masonry formulated with 100% elastomeric acrylic resins. It is internally plasticized for superior aging characteristics eliminating the causes of ruptures, cracks and delamination. ColorLastic bridges hairline cracks, withstands substrate movement and accommodates rapid changes in temperature. |
|
|
|
ColorSil is an advanced alternative to standard concrete and masonry paints, stains or tintable surface sealers. The unique composition of colorist's silicate binder coupled with inorganic pigments produces a colored coating virtually unaffected by ultraviolet light and incapable of supporting fungal or bacterial growth. |
|
|
Duraflow 150 is a three component, self-leveling, epoxy topping composed of a two part, 100% solids epoxy and blended aggregate. All components are precisely measured and packaged for accurate on-site mixing and use. |
|
|
|
Duraflow 250 is a two component, self-leveling, 100% solids epoxy novalac topping. It is a highly chemical resistant coating that is applied at 1/8 in./32 mm. |
|
|
|
Duraflow 450 is a three component, self-leveling, methyl methacrylate (MMA) topping applied at 1/8 in./32 mm. It is comprised of the MMA resin, precisely blended aggregate and catalyst. |
|
Duraflow
550™
 |
Duraflow 550 is a two component, self-leveling vinyl ester topping applied at 1/8 in./125 mils. It is comprised of heavy bodied, vinyl ester resin and a catalyst. |
|
|
|
Duraguard 100 is a two component, low modulus, 100% solids, moisture tolerant epoxy primer, sealer and injection resin. Additionally, it is a bonding agent, coating for reinforcing steel, or when mixed with aggregate, a repair mortar for horizontal repairs. |
|
|
Duraguard 100 WB is a two-component, V.O.C. compliant epoxy. It is water based and can be used as a primer for epoxy or urethane topcoats. Two coats of Duraguard 100 WB alone may be used as a light duty sealer. |
|
|
|
Duraguard 110 is a two component, low modulus, 50% polyamide epoxy designed for use over con-crete as a primer for subsequent coatings or as a topcoat wearing surface. Duraguard 110 may be applied over fresh concrete as a curing com-pound or over older concrete as a primer / sealer. Duraguard 110 is available in clear or pigmented formulations. |
|
|
|
Duraguard 120 is a two component, 100% solids, high build epoxy coating system designed for application at 15-20 mils. |
|
|
|
Duraguard 220 is a two component, 100% solids, chemical resistant, epoxy novalac coating. |
|
|
Duraguard 300 is a clear, single component, moisture curing urethane sealer. It is moderately chemical resistant and produces a glossy appearance. |
|
|
|
Duraguard 310 CRU is a two component, aliphatic polyurethane coating. It may be used as a topcoat over epoxy and epoxy novalac systems to improve chemical and ultraviolet light resistance. |
|
|
Duraguard 400 is a two-component, fast-setting methyl methacrylate (MMA) primer/sealer for horizontal concrete. It is comprised of the MMA resin and a catalyst. An accelerator is available for use in cold temperatures. |
|
|
|
Duraguard 420 is a two-component, high build, Methyl Methacrylate (MMA) coating. It is comprised of an MMA resin and a catalyst. An accelerator is available for use in cold temperatures. |
|
|
|
Duraguard 500 is a two-component, flexible, vinyl ester primer for use with Duraguard 500 Series coatings and toppings. It is comprised of vinyl ester resin and a catalyst. |
|
|
|
Duraguard 520 and 530 aretwo-component, 100% solids, flake-filled vinyl ester coating systems with superior levels of chemical resistance, adhesion, tensile and flexural strengths. Duraguard 520 is a 15-20 mil coating while Duraguard 530 is a high build system applied at 30 mils per coat for enhanced chemical resistance in extremely harsh environments. |
|
|
|
Durastone 140 is a three component, trowel applied epoxy topping consisting of a two part, 100% solids epoxy and a precisely blended aggregate. It is normally installed at 0.25 inch (0.64 cm) depth. |
|
|
|
Graffiti Stopper is a two component polyester urethane developed specifically to protect surfaces from graffiti. Once applied to most surfaces, Graffiti Stopper will prevent the adhesion of most coatings, paints and inks to the surface. Paints will typically bead on the surface and make the development of letters or designs virtually impossible. Once dried on the surface, paints or inks can be removed without the use of harsh chemicals. Graffiti can be removed with a dry cloth or with a mild solvent such as mineral spirits or naptha without leaving a shadow on the surface or damaging the coating. |
|
|
|
MasterGard 400 is a cold applied high quality asphalt emulsion containing bentonite clay that forms a damp-proof barrier on concrete or masonry walls. This breathable film protects against capillary moisture migration while not limiting vapor transmission. |
|
|
|
MasterGard 700 is a cold applied, solvent based, asphalt damproofing containing liquid asphalt with non-asbestos fibers. |
|
|
|
Safe-Thane is a clear, single component, water-based polyurethane coating for wood, concrete and masonry. Safe-Thane exhibits excellent mar and scuff resistance when applied to rigid substrates and will produce a high gloss with outstanding long term weathering performance. |
|
|
Textured II is a heavy, bodied, 100% acrylic emulsion, decorative, textured coating. It develops a tough durable water repellent film that is alkali, acid and mildew resistant and contains an inhibitor to prevent mold and fungus growth. |
|
|
|
TextureDOT is a heavy bodied, 100% acrylic emulsion, decorative, textured coating. It develops a tough, durable, water repellent film that is alkali, acid and mildew resistant. TextureDOT also contains an inhibitor to prevent mold and fungus growth. |
|